Faculdade de Engenharia (FEUP)
Faculty of Engineering

Universidade do Porto (UP)

Publications Actions
Publicações no Perfil Institucional do Authenticus

Uma Instituição (Grupo) no Authenticus é uma organização que engloba um conjunto de Investigadores (equipa da Instituição ou do Grupo). O conjunto de Investigadores depende da estrutura organizacional da instituição em cada ano e pode ser definido no perfil da Instituição, na secção “Investigadores”. Com base na equipa definida, o Authenticus produz listas de publicações, estatísticas e relatórios institucionais.

As publicações listadas no perfil da Instituição no Authenticus dependem de dois parâmetros:

  • Investigadores associados à equipa da Instituição em cada ano.
  • Origem das Publicações.

As publicações associadas à Instituição podem ter três origens:

  • Publicações validadas pelos membros da equipa - Inclui todas as publicações validadas pelos membros da equipa; é necessário que a equipa da Instituição esteja definida.
  • Todas as Publicadas pelos membros da equipa - Inclui todas as anteriores mais aquelas em que um dos autores foi identificado com um membro da equipa, ainda que não tenha sido validada; é necessário que a equipa da Instituição esteja definida.
  • Com Base na Afiliação - inclui todas as publicações que têm a Instituição ou o Grupo mencionado na afiliação; não é necessário que a equipa da Instituição esteja definida mas, por outro lado, não é garantido que todas as publicações da Instituição sejam listadas.
External   Internal

Update Citation

No data about last update.
Rules:
 This actions updates publications citations of every team member.
 Only validated by team members publications are included.
 Only the current year team is included in this action.>
 The action is executed in the background, thus the results are NOT immediate.
 This actions can be executed only once a month!

Update PrePrints

No data about last update.
Rules:
 This actions updates all pre print publications of the group/institution.
 Only validated by current year team members publications are included.
 The action is executed in the background, thus the results are NOT immediate.
 This actions can be executed only once a day!

Publications Count: 30812

627 Team Members
Filters -> Year: 2026
4221
TÍTULO: Wide-Area Composite Load Parameter Identification Based on Multi-Residual Deep Neural Network  Full Text
AUTORES: Afrasiabi, Shahabodin; Afrasiabi, Mousa; Jarrahi, Mohammad Amin; Mohammadi, Mohammad; Aghaei, Jamshid; Javadi, Mohammad Sadegh ; Shafie Khah, Miadreza; João P. S. Catalão ;
PUBLICAÇÃO: 2023, FONTE: IEEE TRANSACTIONS ON NEURAL NETWORKS AND LEARNING SYSTEMS, VOLUME: 34, NÚMERO: 9, PÁGINAS: 6121-6131
INDEXADO EM: Scopus WOS DBLP CrossRef: 24
4222
TÍTULO: Wireless technologies towards 6G
AUTORES: Campos, Rui ; Ricardo, Manuel ; Pouttu, Ari; Correia, Luis M.;
PUBLICAÇÃO: 2023, FONTE: EURASIP JOURNAL ON WIRELESS COMMUNICATIONS AND NETWORKING, VOLUME: 2023, NÚMERO: 1, PÁGINAS: 42
INDEXADO EM: Scopus WOS DBLP CrossRef: 4
4223
TÍTULO: Work‐from‐home impacts on software project: A global study on software development practices and stakeholder perceptions  Full Text
AUTORES: Anh Nguyen‐Duc; Dron Khanna; Giang Huong Le; Des Greer; Xiaofeng Wang; Luciana Martinez Zaina; Gerardo Matturro; Jorge Melegati ; Eduardo Guerra; Petri Kettunen; Sami Hyrynsalmi; Henry Edison; Afonso Sales; Rafael Chanin; Didzis Rutitis; Kai‐Kristian Kemell; Abdullah Aldaeej; Tommi Mikkonen; Juan Garbajosa; Pekka Abrahamsson;
PUBLICAÇÃO: 2023, FONTE: Software: Practice and Experience, VOLUME: 54, NÚMERO: 5, PÁGINAS: 896-926
INDEXADO EM: CrossRef: 5
4225
TÍTULO: 18Ni300 Maraging Steel Produced via Direct energy Deposition on H13 Tool Steel and DIN CK45
AUTORES: Gil, J; Seca, R; Amaral, R; Emadinia, O; Reis, A ; de Jesus, A ;
PUBLICAÇÃO: 2022, FONTE: 25th International Conference on Material Forming, ESAFORM 2022 in Key Engineering Materials, VOLUME: 926 KEM, PÁGINAS: 194-205
INDEXADO EM: Scopus CrossRef: 4
4226
TÍTULO: 3D Breast Volume Estimation
AUTORES: Gouveia, PF; Oliveira, HP ; Monteiro, JP ; Teixeira, JF ; Nuno Lourenço-Silva ; Pinto, D; Mavioso, C; Anacleto, J; Martinho, M; Duarte, I; Cardoso, JS ; Cardoso, F; Cardoso, MJ;
PUBLICAÇÃO: 2022, FONTE: EUROPEAN SURGICAL RESEARCH, VOLUME: 63, NÚMERO: 1, PÁGINAS: 3-8
INDEXADO EM: Scopus WOS CrossRef: 6 Unpaywall Handle
4227
TÍTULO: 3D printed devices to avoid hand contact with commonly shared surfaces  Full Text
AUTORES: Pais, A.; Ferreira, C. ; Pires, V; Silva, V; Jorge Lino Alves ; Bastos, J. ; Belinha, J. ;
PUBLICAÇÃO: 2022, FONTE: INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, VOLUME: 16, NÚMERO: 3, PÁGINAS: 1187-1195
INDEXADO EM: Scopus WOS CrossRef Handle
4228
TÍTULO: 3D Printed Poly(epsilon-caprolactone)/Hydroxyapatite Scaffolds for Bone Tissue Engineering: A Comparative Study on a Composite Preparation by Melt Blending or Solvent Casting Techniques and the Influence of Bioceramic Content on Scaffold Properties  Full Text
AUTORES: Biscaia, Sara; Mariana Vieira Branquinho; Alvites, Rui D.; Fonseca, Rita; Sousa, Ana Catarina; Pedrosa, Silvia Santos; Caseiro, Ana R. ; Guedes, Fernando; Patricio, Tatiana; Viana, Tania; Mateus, Artur ; Mauricio, Ana C. ; Alves, Nuno ;
PUBLICAÇÃO: 2022, FONTE: INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES, VOLUME: 23, NÚMERO: 4, PÁGINAS: 2318
INDEXADO EM: WOS CrossRef Handle
4229
TÍTULO: 3D Printing as an Efficient Way to Prototype and Develop Dental Implants
AUTORES: Carlos Aurelio Andreucci; Elza M M Fonseca ; Renato N Jorge ;
PUBLICAÇÃO: 2022, FONTE: BioMedInformatics, VOLUME: 2, NÚMERO: 4, PÁGINAS: 671-679
INDEXADO EM: Scopus CrossRef
4230
TÍTULO: 3D printing trends and perspectives
AUTORES: Jorge Lino Alves ; Santana, L;
PUBLICAÇÃO: 2022, FONTE: Polymers for 3D Printing: Methods, Properties, and Characteristics, PÁGINAS: 369-383
INDEXADO EM: Scopus CrossRef: 1
4231
TÍTULO: 3D Thermo-Hygro-Mechanical Simulation of a RC Slab Under Restrained Shrinkage and Applied Loads: Influence of the Reinforcement Ratio on Service Life Behaviour
AUTORES: José Gomes; Rui Carvalho; Carlos Sousa ; José Granja; Rui Faria; Dirk Schlicke; Miguel Azenha ;
PUBLICAÇÃO: 2022, FONTE: RILEM Bookseries, VOLUME: 34, PÁGINAS: 321-334
INDEXADO EM: Scopus CrossRef
4232
TÍTULO: 3DupIC: An Underwater Scan Matching Method for Three-Dimensional Sonar Registration  Full Text
AUTORES: Ferreira, Antonio ; Almeida, Jose ; Martins, Alfredo ; Matos, Anibal ; Silva, Eduardo ;
PUBLICAÇÃO: 2022, FONTE: SENSORS, VOLUME: 22, NÚMERO: 10, PÁGINAS: 3631
INDEXADO EM: Scopus WOS DBLP CrossRef: 5
4233
TÍTULO: 4D structures for the short-time building of emergency shelters
AUTORES: Costa, L. Alice; Carvalho, Barbara Rangel ; Jorge Lino Alves ; Marques, Antonio T.; da Silva, Andre Filipe B. M.; Esfandiari, Puria; da Silva, Joao Francisco M. G.; Silva, Ana Rita; Parente, Marco ;
PUBLICAÇÃO: 2022, FONTE: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, PÁGINAS: 146442072210864
INDEXADO EM: Scopus WOS CrossRef
4234
TÍTULO: 4º Congresso Português de Building Information Modelling vol. 1 - ptBIM
AUTORES: José Granja; João Poças Martins ;
PUBLICAÇÃO: 2022
INDEXADO EM: CrossRef Unpaywall
4235
TÍTULO: 4º congresso português de ‘Building Information Modelling’ vol. 2 - ptBIM
AUTORES: Bruno Figueiredo; João Poças Martins ; José Granja; José Carlos Lino; Miguel Azenha;
PUBLICAÇÃO: 2022
INDEXADO EM: CrossRef Unpaywall
4236
TÍTULO: 5G and governance through technology
AUTORES: Garcia E Silva, Hermann Bergmann; Ricardo, Manuel ;
PUBLICAÇÃO: 2022, FONTE: EPTIC, VOLUME: 24, NÚMERO: 1, PÁGINAS: 7-21
INDEXADO EM: WOS
4237
TÍTULO: 9-DOF IMU-Based Attitude and Heading Estimation Using an Extended Kalman Filter with Bias Consideration  Full Text
AUTORES: Farahan, Sajjad Boorghan; Machado, Jose J. M. ; de Almeida, Fernando Gomes ; João Manuel R. S. Tavares ;
PUBLICAÇÃO: 2022, FONTE: SENSORS, VOLUME: 22, NÚMERO: 9, PÁGINAS: 3416
INDEXADO EM: Scopus WOS DBLP CrossRef: 37
4238
TÍTULO: <i>HeartSpot</i>: Privatized and Explainable Data Compression for Cardiomegaly Detection
AUTORES: Johnson, Elvin; Mohan, Shreshta; Gaudio, Alex; Smailagic, Asim; Faloutsos, Christos; Campilho, Aurelio ;
PUBLICAÇÃO: 2022, FONTE: 4th IEEE-EMBS International Conference on Wearable and Implantable Body Sensor Networks (BSN) / 18th IEEE-EMBS International Conference on Biomedical and Health Informatics (BHI) in 2022 IEEE-EMBS INTERNATIONAL CONFERENCE ON BIOMEDICAL AND HEALTH INFORMATICS (BHI) JOINTLY ORGANISED WITH THE IEEE-EMBS INTERNATIONAL CONFERENCE ON WEARABLE AND IMPLANTABLE BODY SENSOR NETWORKS (BSN'22), VOLUME: abs/2210.02241
INDEXADO EM: WOS DBLP CrossRef: 1
4239
TÍTULO: <p>A comprehensive review of NOx and N2O mitigation from industrial streams</p>  Full Text
AUTORES: Alves, Luis; Holz, Laura I., V; Fernandes, Celina; Ribeirinha, Paulo; Mendes, Diogo; Fagg, Duncan P.; Mendes, Adelio ;
PUBLICAÇÃO: 2022, FONTE: RENEWABLE & SUSTAINABLE ENERGY REVIEWS, VOLUME: 155, PÁGINAS: 111916
INDEXADO EM: Scopus WOS CrossRef: 39
4240
TÍTULO: <p>An overview of structural systems theory</p>  Full Text
AUTORES: Ramos, Guilherme ; A. Pedro Aguiar ; Pequito, Sergio;
PUBLICAÇÃO: 2022, FONTE: AUTOMATICA, VOLUME: 140, PÁGINAS: 110229
INDEXADO EM: Scopus WOS DBLP CrossRef: 46

Results per Page: 20.
Página 212 de 1541. Total de resultados: 30812.