Faculdade de Engenharia (FEUP)
Faculty of Engineering

Universidade do Porto (UP)

Publications Actions
Publicações no Perfil Institucional do Authenticus

Uma Instituição (Grupo) no Authenticus é uma organização que engloba um conjunto de Investigadores (equipa da Instituição ou do Grupo). O conjunto de Investigadores depende da estrutura organizacional da instituição em cada ano e pode ser definido no perfil da Instituição, na secção “Investigadores”. Com base na equipa definida, o Authenticus produz listas de publicações, estatísticas e relatórios institucionais.

As publicações listadas no perfil da Instituição no Authenticus dependem de dois parâmetros:

  • Investigadores associados à equipa da Instituição em cada ano.
  • Origem das Publicações.

As publicações associadas à Instituição podem ter três origens:

  • Publicações validadas pelos membros da equipa - Inclui todas as publicações validadas pelos membros da equipa; é necessário que a equipa da Instituição esteja definida.
  • Todas as Publicadas pelos membros da equipa - Inclui todas as anteriores mais aquelas em que um dos autores foi identificado com um membro da equipa, ainda que não tenha sido validada; é necessário que a equipa da Instituição esteja definida.
  • Com Base na Afiliação - inclui todas as publicações que têm a Instituição ou o Grupo mencionado na afiliação; não é necessário que a equipa da Instituição esteja definida mas, por outro lado, não é garantido que todas as publicações da Instituição sejam listadas.
External   Internal

Update Citation

No data about last update.
Rules:
 This actions updates publications citations of every team member.
 Only validated by team members publications are included.
 Only the current year team is included in this action.>
 The action is executed in the background, thus the results are NOT immediate.
 This actions can be executed only once a month!

Update PrePrints

No data about last update.
Rules:
 This actions updates all pre print publications of the group/institution.
 Only validated by current year team members publications are included.
 The action is executed in the background, thus the results are NOT immediate.
 This actions can be executed only once a day!

Publications Count: 30770

623 Team Members
Filters -> Year: 2026
41
TÍTULO: Evaluating the Environmental Efficiency of On-Site and Off-Site 3D Construction Printing: A Roadmap Towards Sustainable Building Practices
AUTORES: Jaime Cunha; Barbara Rangel ; Rodrigo Vilas Boas;
PUBLICAÇÃO: 2026, FONTE: 3rd International Conference on Construction, Energy, Environment, and Sustainability, CEES 2025 in Lecture Notes in Civil Engineering, VOLUME: 745 LNCE, PÁGINAS: 407-418
INDEXADO EM: Scopus CrossRef
42
TÍTULO: Evaluation of printing performance of cementitious pastes with alternative powders  Full Text
AUTORES: Teixeira, Joa; Jesus, Manuel; Rangel, Barbara; Jorge Lino Alves ; Maia, Lino;
PUBLICAÇÃO: 2026, FONTE: CONSTRUCTION AND BUILDING MATERIALS, VOLUME: 510, PÁGINAS: 145274
INDEXADO EM: Scopus WOS CrossRef
43
TÍTULO: Evidence-Based Activism and Knowledge Co-production: A Case Study of Online Communities on Therapeutic Cannabis
AUTORES: Alice Rangel Teixeira; Carla Teixeira Lopes ;
PUBLICAÇÃO: 2026, FONTE: Lecture Notes in Networks and Systems, VOLUME: 1514 LNNS, PÁGINAS: 349-360
INDEXADO EM: Scopus CrossRef: 1 Unpaywall
44
TÍTULO: Expanding 3D Concrete Printing Customization with Biomimetic Textures
AUTORES: João Teixeira; Manuel Jesus; Barbara Rangel ; Lino Maia; Jorge Lino Alves ;
PUBLICAÇÃO: 2026, FONTE: 3rd International Conference on Construction, Energy, Environment, and Sustainability, CEES 2025 in Lecture Notes in Civil Engineering, VOLUME: 743 LNCE, PÁGINAS: 199-207
INDEXADO EM: Scopus CrossRef
45
TÍTULO: FAB-BIO: A Review of Bio-based Materials Applied on 3D-Printed Living Walls
AUTORES: Abdishukri Rashid Aden; Alejandra Paola Nuñez Montoya; Josef Mari Ponce; Barbara Rangel ; Jaime Cunha;
PUBLICAÇÃO: 2026, FONTE: 3rd International Conference on Construction, Energy, Environment, and Sustainability, CEES 2025 in Lecture Notes in Civil Engineering, VOLUME: 743 LNCE, PÁGINAS: 605-612
INDEXADO EM: Scopus CrossRef
46
TÍTULO: Ferroelectric and ferroionic multifunctional quantum sensors: Incursion into applications
AUTORES: Gomes, Beatriz M.; Prior, Tomas; Freitas, Angela; Vale, Antonio B.; Maia, Beatriz A.; Lebre, Hugo; Baptista, Manuela C.; Dantas, Raquel; M H Braga ;
PUBLICAÇÃO: 2026, FONTE: APPLIED PHYSICS REVIEWS, VOLUME: 13, NÚMERO: 1
INDEXADO EM: Scopus WOS CrossRef
47
TÍTULO: Human-Centered Augmented Reality in Manufacturing: Enhancing Efficiency, Accuracy, and Operator Adoption
AUTORES: Ramalho, Filipa Rente ; Soares, Antonio Lucas ; Simoes, Ana Cristina ; Almeida, Antonio Henrique ; Oliveira, Manuel;
PUBLICAÇÃO: 2026, FONTE: 44th International Conference on Advances in Production Management Systems-APMS-Annual in ADVANCES IN PRODUCTION MANAGEMENT SYSTEMS. CYBER-PHYSICAL-HUMAN PRODUCTION SYSTEMS: HUMAN-AI COLLABORATION AND BEYOND, APMS 2025, PT I, VOLUME: 764, PÁGINAS: 33-47
INDEXADO EM: Scopus WOS CrossRef
49
TÍTULO: Impacts of e-Scooter Use on Health and Well- Being: A Systematic Review
AUTORES: Bruno Cardoso; Sara Ferreira; Luciano Moreira ;
PUBLICAÇÃO: 2026, FONTE: Studies in Systems, Decision and Control, VOLUME: 231, PÁGINAS: 391-411
INDEXADO EM: Scopus CrossRef Unpaywall
50
TÍTULO: Improving adherence to an online intervention for low mood by a virtual coach or personalized motivational feedback messages: A three-arm pilot randomized controlled trial
AUTORES: Khadicha Amarti; Marketa Čihařová; Simon Provoost; Mieke J Schulte; Annet Kleiboer; Ali El Hassouni; Gonçalo Campos Gonçalves ; Heleen Riper;
PUBLICAÇÃO: 2026, FONTE: Internet Interventions, VOLUME: 43, PÁGINAS: 100900
INDEXADO EM: Scopus CrossRef Unpaywall
51
TÍTULO: Improving Natural Ventilation Through 3D Concrete Printing
AUTORES: Elis Ribeiro; Barbara Rangel ; Filipe Brandão; Bruno Acácio Ferreira Figueiredo; Lino Maia; Vanessa Tavares;
PUBLICAÇÃO: 2026, FONTE: 3rd International Conference on Construction, Energy, Environment, and Sustainability, CEES 2025 in Lecture Notes in Civil Engineering, VOLUME: 743 LNCE, PÁGINAS: 423-431
INDEXADO EM: Scopus CrossRef
52
TÍTULO: Industrial Application of High-Temperature Heat and Electricity Storage for Process Efficiency and Power-to-Heat-to-Power Grid Integration
AUTORES: António Coelho ; Ricardo Silva ; Filipe Joel Soares ; Clara Gouveia ; Adélio Mendes ; José Vicente Silva; João Pedro Freitas;
PUBLICAÇÃO: 2026, FONTE: Lecture Notes in Energy, VOLUME: 47, PÁGINAS: 3-26
INDEXADO EM: Scopus CrossRef Unpaywall
53
TÍTULO: Influence of microplastics on microalgal performance during wastewater polishing
AUTORES: Paulo M.S Sousa; Carla A Orge ; Olívia S.G.P Soares ; Cátia A Sousa; Manuel Simões;
PUBLICAÇÃO: 2026, FONTE: Journal of Environmental Sciences
INDEXADO EM: CrossRef
54
TÍTULO: Integrating Modular Construction Principles into Architectural Design Processes, a Review on International Project Development Frameworks and Guidelines
AUTORES: Leonor Reis; Caroline Minetto; Barbara Rangel ;
PUBLICAÇÃO: 2026, FONTE: 3rd International Conference on Construction, Energy, Environment, and Sustainability, CEES 2025 in Lecture Notes in Civil Engineering, VOLUME: 743 LNCE, PÁGINAS: 269-277
INDEXADO EM: Scopus CrossRef
55
TÍTULO: Integrating real traffic data for fatigue assessment of metallic railway bridges aided by digital twin technology  Full Text
AUTORES: Nhamage, Idilson A.; Horas, Claudio S.; João Poças Martins ; Matos, Jose C.;
PUBLICAÇÃO: 2026, FONTE: ADVANCES IN STRUCTURAL ENGINEERING
INDEXADO EM: Scopus WOS CrossRef Unpaywall Handle
56
TÍTULO: Large Format Additive Manufacturing with Cement and Clay Applications
AUTORES: João Teixeira; Manuel Jesus; Elis Ribeiro; Barbara Rangel; Jorge Lino Alves ; Lino Maia;
PUBLICAÇÃO: 2026, FONTE: Large Format Additive Manufacturing, PÁGINAS: 245-268
INDEXADO EM: Scopus CrossRef
57
TÍTULO: Large-format Additive Manufacturing with Cement and Clays: Materials Review
AUTORES: Jorge Lino Alves ; Leonardo Santana;
PUBLICAÇÃO: 2026, FONTE: Large Format Additive Manufacturing, PÁGINAS: 177-198
INDEXADO EM: Scopus CrossRef
58
TÍTULO: Large-Format Additive Manufacturing with Cement and Clays: Process Review
AUTORES: Leonardo Santana; Jorge Lino Alves ;
PUBLICAÇÃO: 2026, FONTE: Large Format Additive Manufacturing, PÁGINAS: 155-176
INDEXADO EM: Scopus CrossRef
59
TÍTULO: Low-Cost and In-line Monitoring System for Pressure Estimation in a FFF 3D Printhead
AUTORES: Dávila Moreira Lopes Silva; Luís Fernando Borges Caldeira; Jorge Lino Alves ; Zilda Castro Silveira;
PUBLICAÇÃO: 2026, FONTE: Lecture Notes in Mechanical Engineering - Advances in Manufacturing Engineering Research, PÁGINAS: 1-15
INDEXADO EM: CrossRef

Results per Page: 20.
Página 3 de 1539. Total de resultados: 30770.